Water well drilling rig XSL3/160

XCMG XSL3/160 water well drilling rig Self-propelled hydraulic rig on a crawler chassis XSL3/160 manufactured by XCMG is designed for drilling water wells up to 300 m deep. The equipment can also be used for installing bored piles in the construction of building foundations. The main purpose of the unit is to carry out drilling work in engineering geological and hydrogeological surveys in hard-to-reach places. Designed for hydrogeology, water wells, exploration, engineering surveys, underground pit, vent, coal seam gas, shale gas, geothermal hole and construction. Areas of application: - drilling of large diameter water intake wells - drilling of ventilation wells - degassing of coal seams - geological exploration drilling (exploration) - drilling into underground mine workings, etc. No. Item Unit Parameters 1 Drilling capacity Drilling depth m 300(Ф89) 2 Maximum diameter of the working stand mm Ф254 3 Feeding system Max. Load capacity kN 160 4 Max. feed force kN 80 5 Max. Lifting speeds m/min 32 6 Maximum lowering speed m/min 60 7 Working stroke mm 3800(7000) 8 Main drive spindle Torque Nm 6600/3300 9 Rotation speed r/min 95/190 10 Spindle shaft diameter mm Φ45 11 Power station drilling Engine model / YUCHAI YC4A125-T30 12 Power / rotation kW 92 13 Mast assembly Load capacity kN 15 15 Clamping vice Max. torque Nm 18000 16 Vise clamping range mm Customized 17 Mortar hose Diameter hoses mm Φ55 18 Pressure MPa 8 19 Chassis Type Drives / Track 20 Power / rotation kW/rpm / 21 Maximum movement km/h 2.4 22 Maximum climbing gradient % 39 23 Dimensions in operation Length x Width x Height mm 3980×3130×6500 (3980×3130×8100) 24 Dimensions in transportation Length x Width x Height mm 4450(3980)×1800×2400 (6050(3980)×1800×2400) 25 Weight t 9