Three Phase Diode Assembly, 400 Amp on Cooler with Fan, Suitable for 12, 24, 36, 42, 48 and other voltages from 6 to 600 Volts

Three-phase diode assembly, 400 Amp on cooler with fan, suitable for voltages 12, 24, 36, 42, 48 and other voltages from 6 to 600 Volts Three-phase diode assembly DN400A16V4650N-120 is a device for converting current from AC to DC. DN400A16V4650N-120 has compact dimensions, long service life and a relatively low price for the time savings you get by purchasing a ready-made assembly. Technical characteristics of the diode assembly DN400A16V4650N-120: Maximum current: 400 A Maximum voltage: 600 V Dimensions (L x W x H): 153 x 120 x 176 Weight: 3.5 kg Three-phase diode assembly DN400A16V4650N-120 consists of the following elements: 1 ) Three-phase diode bridge up to 400 Amperes up to 1600 Volts MDS400/16 Diode bridge is an electrical circuit designed to convert (“rectify”) alternating current into direct current. Performed using a Graetz bridge circuit. The MDS400/16 diode bridge consists of six diodes that provide uniform load across each of the three phases and maintain network stability. Features of the MDS400/16 are its compact housing, which ensures ease of installation, operation and maintenance of the bridge, reliable operation and long service life. MDS400/16 can be used in industrial equipment (power supplies, chargers, motor control units, power regulators), power and control units for household appliances, automotive rectifiers, etc. 2) Cooler for semiconductors 115x125x135mm KL-285 Any semiconductor - for example, a diode bridge, generates heat. If the heat is not properly dissipated, the device will overheat and burn out. The radiator absorbs heat at the point of contact and dissipates it over the rest of the surface. The KL-285 radiator is made of aluminum. Thanks to the large number of fins, the KL-285 has a large area, which increases the ability to dissipate heat. 3) Fan 119x119x38mm 220VAC 4650N EBM Papst For cooling electronics, it is recommended to use axial fans equipped with an external housing and an electric motor. The 4650N inline axial fan is of high quality, reliable and durable. Protected from resistance overload. The housing and impeller are made of metal. The direction of rotation is clockwise. The compact design allows you to save space in the device. 4) Thermal paste for radiators Connector KPT-8 Thermal paste KPT-8 is a plastic substance with high thermal conductivity, and is used to improve heat exchange between the radiator and other electronic components that intensively produce heat, for example, a diode bridge. The thermal conductivity of the paste is 0.65 W/(m*K) at 100 °C, and the operating temperature range is from -60 to +180 °C.