Equipment

The main activity of the company was the introduction of innovative technologies used in the development of fields for the collection and preparation of oil and gas and the further processing of natural and associated petroleum gas. The block-modular Gas Treatment Unit (BMUPG) is manufactured...
LocationRussian Federation Ad typeSale
Contact us for a price
In stock
A flare separator (FS) is an oil and gas equipment that is used to purify non-aggressive gases and air from dropping liquid. FS flare separators are designed and manufactured with a volume from 4.0 to 140 m3, with a nominal pressure in the apparatus of up to 4.0 MPa. The efficiency of gas...
Contact us for a price
In stock
Working volume, m3: from 6.3 m3 to 150 m3 Operating pressure, MPa: from 0.6 to 4.0 Material version: Steel 09G2S, 12Х18Н10Т, 10Х17Н13М2Т Type of device bottoms: Elliptical Minimum temperature of the working medium: -30°С Maximum temperature of the working medium environment: +100°С Minimum...
Contact us for a price
In stock
Working volume, m3: from 6.3 m3 to 150 m3 Operating pressure, MPa: up to 6.3 Material version: Steel 09G2S, 12Х18Н10Т, 10Х17Н13М2Т Type of apparatus bottoms: Elliptical Minimum temperature of the working medium: -30°С Maximum temperature of the working medium: +100 °C Minimum ambient temperature:...
Contact us for a price
In stock
1. Design pressure 6.3 MPa 2. Operating pressure 1.8-5.4 3. Operating temperature +5 to +50 4. Design temperature + 50 5. Material 09G2S 6. Service life 20 years
1 10000 RUB
In stock
Oil and gas separator Oil and gas separator (OGS) - SCV-5N (SCV-8N) is designed for separation (separation) of gas-oil (gas-condensate) flow, degassing of the liquid (oil, gas-condensate) phase, primary purification of the gas flow. The separator is distinguished by the fact that it is...
LocationRussian Federation Ad typeSale
Contact us for a price
In stock
Moisture-oil separators (WMO) are designed to clean compressed air from droplets, aerosols, finely dispersed moisture, oil and mechanical impurities. Moisture-oil separators are conventionally divided into: designed, manufactured and operated in full compliance with the requirements of PB...
Contact us for a price
In stock
PC AYK LLC manufactures the BRS-2 product (NKT-60 thread), and also has the ability to supply it to your enterprise. The product is designed for quick connection and disconnection of high-pressure pipelines and other units. The range of uses of BRS-2 is wide and varies from connecting tubing...
LocationRussian Federation Ad typeSale
1 50000 RUB
In stock
New oil and gas equipment is 2 times cheaper than the market No. 4045208, posted yesterday at 23:50 7 +6 1 MoreRaise for free List of equipment: 1. Drilling Rig 3D-86-1 2. Drilling Rig 3D-76 3. Drilling Rig 4E-76 4. NBO – 3D-86-1 (Drilling equipment set) 5. Drilling rig without tower and base 6....
Contact us for a price
In stock
The specialized car-repair machine VRM “Vityaz” is designed for maintenance and repair of freight cars during depot repairs and allows the following operations: straightening of side panels and side vertical posts; straightening of end panels and doors; prestressing of individual elements when...
Contact us for a price
In stock
For more than 18 years, UNICOM has been a leading supplier of high-quality innovative equipment for the oil and gas sector of Russia and foreign companies operating in our country. This is due to the presence of: Own Design and Technology Department Highly qualified personnel Innovative...
LocationRussian Federation Ad typeSale
Contact us for a price
In stock
The UPLM-1 “Katyusha” installation is designed for: pressing and cold deformation of gondola car hatches; installation and dismantling of hatches; removal and installation of the car's automatic coupler, equipment, components and mechanisms located under the car's frame; lifting and supplying...
Contact us for a price
In stock
The mobile hydraulic tool station PRM-D is designed for repairing freight cars in depot conditions. The post allows you to perform the following types of technological operations: pressing and closing the unloading hatches of gondola cars; straightening bent handrails and steps of carriages;...
Contact us for a price
In stock
Onboard vehicle URAL-4320 (6x6, YaMZ-236NE2, 230 hp) with a Palfinger PK 8500 B crane-manipulator (load moment - 7.2 tm, maximum reach - 9.6 m, lifting capacity at maximum/minimum reach - 720/2600 kg, rotation angle - 400 degrees). New. Price is negotiable. LLC "Trading House Autospetstechnika"
Contact us for a price
In stock
Combined road machine KDM-7993 on the VOLVO FM11 chassis (4x2, lift capacity - 13.1 tons). Capacity of the sand spreader / dump body - 5 / 7 cubic meters. Capacity of 2 tanks for humidification - 1182 l. Snow removal width with front rotary blade / central brush - 2.6-3.4 / 2.5 m. Distribution...
LocationRussian Federation
Contact us for a price
In stock
Combined vehicle KO-829N on the GAZ-S41R11 (GAZ-S41R13) "GAZon NEXT" chassis (4x2, YaMZ-534, 148.2 hp). Tank / distribution body capacity - 4 / 3 cubic meters. The width of the working area of the interbase brush / PGM distributor / front rotary blade / low-pressure watering equipment - 2.1 / 2 -...
Contact us for a price
In stock
The oilfield vacuum machine AKN-10 on the URAL-NEXT chassis is classified as blowout prevention equipment and is used to eliminate the consequences of oil product leaks. The AKN-10 tank truck on a URAL-NEXT 4320 hood chassis carries out mechanized collection of flammable liquids for subsequent...
Ad typeSale Statenew
Contact us for a price
In stock
For sale is a new articulated (double-knee) aerial platform BC-22.02 on the GAZon NEXT chassis with a lifting height of 22 meters, a maximum boom reach of 9.5 meters, with an electrically insulated (up to 1000 V) cradle with a lifting capacity of 250 kg at a negotiated price.
LocationRussian Federation ViewVehicle tower
Contact us for a price
In stock
MDR-5 midiliner is a highly maneuverable machine designed for applying road markings in the city, performing large volumes of work with paint or plastic. Engine 4-cylinder diesel engine, volume 2.4 liters, water-cooled. 38.0 kW (50.9 l/s) at 2600 rpm. Compressor Piston compressor, capacity: 1000...
LocationRussian Federation Ad typeSale
Contact us for a price
In stock
The new sweeping machine PUM-15.VVV The machine is manufactured on the basis of the GAZon NEXT chassis and is fundamentally different from its predecessors in the presence of modern technical solutions and design. PUM-15 is designed for mechanized cleaning of chute areas and roadways of streets...
LocationRussian Federation ViewMunicipal vehicles
100 RUB
In stock
Show another 20 products
Product filters
Место расположения
Тип объявления
Цена

RUB  –  RUB

  • 0RUB
  • 2160000000RUB
Состояние
Год выпуска

 – 

  • 1982
  • 2024