Equipment

We offer at a price. 230 thousand rubles. GENESIS 5508 screw. compressor. New comp.
230 00000 RUB
In stock
The equipment of the Remeza plant (Remeza, Belarus) attracts with its inexpensive price and reliable quality. Quite a few Russian enterprises already operate these compressors and trust this manufacturer. Many components for VK-series compressors are manufactured by leading European...
Contact us for a price
In stock
Drive: coaxial (direct) Motor type: electric Lubrication type: oil Compressor type: screw Receiver: none
Contact us for a price
In stock
Refrigeration screw compressors and units 50 kW - 3000 kW. The advantage of YM LG series piston compressors is their high efficiency, excellent quality - the compressors are subject to strict quality control for performance and operating time. Many patented technical solutions allow YM...
Contact us for a price
In stock
The oil-filled screw compressor ZIF SVE 5.2/0.7 is designed for operation at industrial facilities, in unheated workshops and open areas. Compressor after major overhaul. During the repair the following work was carried out: ✓ Replacement of electric motor bearings; ✓ Replacement of bearings and...
320 00000 RUB
In stock
Screw electric compressor units ZIF-SVE of the ShM series (equipped with a noise-insulating casing and microprocessor control) and ShMCh (an additionally installed frequency converter of engine speed) are used to supply compressed air to enterprises of any type and size. Advantages of the...
LocationRussian Federation Ad typeSale
1 288 00000 RUB
In stock
Screw compressor unit AKV 0.3/0.8 L U2 Designed to supply compressed air to the trolleybus pneumatic system. OKP code 31 8431 Manufactured according to TU 3184-025-05744521-2007 Screw compressor unit AKV 0.3/0.8 L U2 (complete with compressor static converter PSK DC supply voltage): capacity, m3...
Contact us for a price
In stock
Screw compressor on a receiver with dryer FINI MICRO SE 4.0-08-200-ES – Buy wholesale from the manufacturer! Screw compressor on a receiver with dryer FINI MICRO SE 4.0-08-200-ES – buy wholesale at a favorable price from the KITAYPROMTORG company. Direct supplies of high-quality rolled metal from...
343 28800 RUB
In stock
Gasoline piston compressor FINI Warrior 113-5.5S
123 71684 RUB
In stock
AEROMAX 1050/300 is a two-stage air piston compressor with a belt drive designed for all types of professional work.
82 00000 RUB
In stock
1) Manufacturer - Bezhetsk plant ASO; 2)Pressure 10 bar; 3) Receiver volume 430 l; 4) Capacity Input 1500 - Output 1100; 5) Voltage 380V; 6) Oil type lubrication; 7)4 cylinders; 8)2 compression stages; 9) Oil volume 3.2 l; 10) Dimensions 2100x700x1400mm; 11)Noise level 93-100dB; 12) Belt drive...
55 00000 RUB
In stock
Aircast piston compressors manufactured by REMEZA CJSC, Republic of Belarus, are very popular compressors. This line of compressor equipment is represented by the best prices on the market, with a fairly high quality of manufacture. Most often, compressors of this series are installed in various...
40 00000 RUB
In stock
The Remeza SB 4/S-50 LH 20 A compressor is used to compress and supply air to pneumatic tools (drills, impact wrenches, spray guns) under a pressure of 10 bar. The belt drive is covered with a casing to protect it from mechanical damage. The compressor is equipped with a rapid connector with...
26 87400 RUB
In stock
High-pressure piston compressor VT1.5-0.3/150 BusinessAlfaGroup LLC supplies high-pressure piston compressors of the KR-2, AKR-2, AKR-21, KR-25 and VT1.5-0.3/150 series, as well as air compressors of the 4VU1 series -5/9. The high-pressure compressor VT1.5-0.3/150 is designed to maintain a given...
Contact us for a price
In stock
Drive: coaxial (direct) Engine type: electric Lubrication type: oil-free Compressor type: piston Receiver: horizontal
Contact us for a price
In stock
When creating the high-pressure piston compressor, reliable polygonal cylindrical valves were used to ensure no leaks and precise control of air flow, uninterrupted, safe operation even under high pressure and harsh operating conditions. Thanks to the original design, the compressor consumes less...
Contact us for a price
In stock
Feng piston compressor, 225l receiver, 7.5 kW engine, made in China. A complete list of container and food equipment with descriptions and photos is on the website. Moscow, Company E4A.(c)
Contact us for a price
In stock
Remez piston compressor with a 50-liter receiver, a capacity of 420 l/min and a working pressure of 10 bar. Connection to 220V network
LocationRussian Federation Ad typeSale
27 40000 RUB
In stock
DALGAKIRAN DBK 10 is an air piston booster compressor, 7 bar (inlet), maximum pressure (40 bar), with a belt type motor and an adjustable capacity of 2099 m3 / min. DALGAKIRAN DBK 10 has the following options and benefits: ...
306 00000 RUB
In stock
4- and 6-cylinder refrigeration semi-hermetic compressors BITZER are distinguished by the advanced design of valve plates, the highest quality and wear resistance of crankshafts and connecting rod-piston group, highly efficient built-in electric motors cooled by suction vapors, as well as a...
100 RUB
In stock
High-performance compressor NORDBERG NCE50/410V ECO for both domestic and professional use. Double cylinder single stage head with cast iron cylinder and enlarged cooling fins. The electric motor is equipped with thermal protection against overheating and an automatic restart system for...
LocationRussian Federation Ad typeSale
26 00000 RUB
In stock
Oil-free piston compressor units K70 U2 (-01…-03) OKP code 30.20.40 Manufactured according to TU 3184-039-05744521-2013 The units are intended for use on electric locomotives and multiple-unit rolling stock of railways as a source of compressed air for lifting the pantograph. At the same time, it...
Contact us for a price
In stock
We will manufacture the entire group of cyclones to order of any complexity, select and supply a fan for your equipment, air ducts. We will give the best price and decent quality
20 91700 RUB
In stock
Stationary piston industrial compressor 2ВМ4-24/9С, used in production processes of various industrial sectors. Pressure 9 kgf/cm², Capacity 24 Nm³/min, Power 137 kW. The cost depends on the modification and configuration. Call us, our managers will advise you and help you choose the most...
LocationRussian Federation Ad typeSale
2 992 00000 RUB
In stock
Three-phase diode assembly, 400 Amp on cooler with fan, suitable for voltages 12, 24, 36, 42, 48 and other voltages from 6 to 600 Volts Three-phase diode assembly DN400A16V4650N-120 is a device for converting current from AC to DC. DN400A16V4650N-120 has compact dimensions, long service life and...
10 50000 RUB
In stock
A series of modular grain dryers Sukup with one fan. Made in USA. This series of grain dryers operates in grain heating/drying mode, without cooling or in batch drying mode with cooling. Depending on the modification, productivity varies from 8.5 to 26 t/hour. (for corn) Fuel: natural gas or...
Contact us for a price
In stock
Smoke exhausters and fans.
25 00000 RUB
In stock
Units based on cross-flow fans, due to the possibility of using a small-diameter impeller and a fairly large axial length, usually have a flat design (short height) and are installed on a wall or ceiling. Such units are not designed to work with the network and operate with free input and...
LocationRussian Federation Ad typeSale
20 00000 RUB
In stock
1. The inverter plasma-arc cutting machine APRI-40 is an electric welding device for household use and is intended for cutting ferrous metal alloys (steel, charcoal
30 30000 RUB
In stock
Original. Refurbished, factory tested. Weight - 25 kg. Used on Komatsu D65A-EX15 E0, D85A-EX/PX15 bulldozers.
310 89000 RUB
In stock
Heat gun KEVP-21 with a power of 21 kW, equipped with a fan with a capacity of 1700 m3/hour, for quickly heating rooms of 180-200 m2. Temperature rise of +45 degrees relative to the inlet temperature.
LocationRussian Federation Ad typeSale
8 00000 RUB
In stock
An automation cabinet heater (OSHA) with a fan is a heating element for maintaining a microclimate with a fan for better air convection. In cases where the movement (convection) of air is difficult at the place where the heater is installed or it is necessary to purposefully heat a specific...
4 26600 RUB
In stock
Power supply, voltage, V: 380 Pneumatic transport fan, electric motor power, kW: 5.5 Exhaust fan, electric motor power, kW: 5.5 Pneumatic transport fan, rotation speed, rpm: 2830 Power supply, operating voltage, V: 220 Weight, kg: 525 Fan exhaust, rotation speed, rpm: 2830 The air separator is...
Contact us for a price
In stock
Fan - Used when there are 2 layers of film on the greenhouse, the air between the layers is supplied by a fan from under the dome of the structure. This allows you to reduce heating costs by 2 times, obtaining a temperature inside the greenhouse that is 7-8°C higher than outside, without using...
7 50000 RUB
In stock
---Advantages: Stand + clip. Stand for installation on a table. Clip for universal installation. Two speeds will allow you to choose the optimal fan operating mode. Tilt adjustment.--- Technical characteristics: Voltage/frequency: 220V/50Hz; Power: 25 W ;Blade diameter: 15cm;Number of speeds:...
2870 RUB
In stock
Mine hood fans. Type ALM-126/4-A6t/ 211 380 V/3000 W/ 360 rpm AWA 61-45042 German. 2 pcs. 4500 RUR/pcs.
1 50000 RUB
In stock
Fan Ts-4-70-8-1 (analogue Ts (VTs) 4-75, Ts4-76, Ts80-75, Ts86-77) Engine 15 KW 1460 rpm. /min. Fan Ts 4-70-8-1, VTs 4-70-8-1 Designed for air conditioning systems, ventilation systems of industrial, public and residential buildings, as well as for other industrial and sanitary purposes. Main...
93 00000 RUB
In stock
Radial fans with different kW/h parameters are available. To clarify the characteristics and select equipment, please call.
Contact us for a price
In stock
The radial fan VTs 4-70 - 12.5 was not used, it was in storage. General information - low pressure - single-sided suction - spiral rotating housing - 12 blades (curved backwards) - direction of rotation: right or left - power supply parameters 380V/50Hz - motor protection class IP54 Purpose - air...
480 00000 RUB
In stock
Most lines, machines and installations for processing polymer materials include a centrifugal fan-scroll. Its second name is radial fan. This design is intended for transportation and removal of polymeric materials of a certain fraction. The snail fan consists of the following parts: spiral...
LocationRussian Federation Ad typeSale
45 47800 RUB
In stock
Radial fan (scroll motor) PZO 18.5-MUX When processing polymer raw materials, sometimes it becomes necessary to remove a certain fraction of plastic. In this case, a centrifugal fan can be used. Its function is, in addition to transportation, to dry the material. The main structural parts of this...
282 69500 RUB
In stock
Marine and industrial fans, stationary and portable, new and from storage. Impeller OS 250/10-5.1.1 Impeller 22 TsS6 Impeller 250/10 OSO-111 Impeller 28 TsS 34 Impeller 30 TsS 48 Impeller 40TsS 17 Impeller 48 TsS 48 Impeller 56 TsS 34 Impeller 63 / 16 TsSU 11 Impeller 63/25 TsSU -11 Impeller...
100 RUB
In stock
Fan VME-6, VME-8, VME-10, VME-12, AOSh-4, APSh, AZUR Local ventilation fan: Fan VME-6 Fan VME-8 Fan VME-10 Fan VME-12 Mine lighting apparatus: Apparatus AOSH -4 Mine starting device: APSh.M-01 device APSh.M-02 device Leakage current protection device: AZUR-1 device AZUR-2 device AZUR-3 device...
Contact us for a price
In stock
Modern household and industrial fans are no longer simple devices, but entire climate modules that can perform several functions at once and serve large areas. The requirements for their quality are very high, because today there is plenty to choose from and what to prefer, and manufacturers are...
LocationRussian Federation Ad typeSale
Contact us for a price
In stock
Electric manual fan ERV-72 General information: • low pressure • one-way suction • backward curved blades • number of blades – 12 • direction of rotation – right. Purpose: • are intended for supplying air to the premises of various structures in pure ventilation mode from the electrical network...
Contact us for a price
In stock
Fan 65.06601-5070. Warehouse: Novosibirsk. Brand: DOOSAN
19 13626 RUB
In stock
Description of the BLACKSMITH VT1-2.5 fan for the forge: Fan for the VT1-2.5 Blacksmith forge. It is used as a forge volute, providing air supply in a stationary or portable open-type forge (the upper part of the forge is completely open). The fan is supplied assembled. Completely ready for use...
4 90000 RUB
In stock
They are used to move air in rectangular channels of supply and exhaust ventilation systems for residential, public and industrial premises. Advantages: Advanced design with a free impeller High pressure and air flow Reinforced monolithic housing made of 1.5 mm galvanized steel Electric motor...
77 81200 RUB
In stock
Primary radiator cooling fan (left) Chery Tiggo (T11)
3 59000 RUB
In stock
Universal 3-speed fan Makita DCF 102 Z with power supply from 14.4/18 V batteries and the ability to connect to the network. Light weight, compact size and convenient carrying handle. Self-oscillation mode up to 45°. Features and advantages: - Compact and lightweight. - Good power. - Works from...
Contact us for a price
In stock
An effective, low-noise device that differs from radial-type analogues in its simplicity of design and lack of centrifugal force. The main unit of the unit is a cylindrical through ring; Blades are placed at an angle inside the element. Changing the working position of the mechanism transforms...
LocationRussian Federation Ad typeSale
2 80840 RUB
In stock
Exhaust hoods for laboratories and workshops from the RiNM Plant Exhaust hoods are an important component of the ventilation system, designed to eliminate contaminants and odors from the air. For the manufacture of these metal products, only modern technologies are used; the starting material is...
14 50000 RUB
In stock
The wall-mounted ventilation hood is designed to clean the air in the kitchen from grease, oil, smoke and water vapor. The umbrella must be connected to the exhaust ventilation system of the enterprise where it is installed. To speed up the process of air purification and increase the rate of air...
18 46000 RUB
In stock
Ventilation hood ATESY ZVN-L-1-500. 500.500-02 is designed to purify the air from excess steam, smoke, grease and combustion products and ensure its recirculation in public catering and retail establishments. The model is equipped with a grease collector and easily removable labyrinth filters....
20 41100 RUB
In stock
The APK type supply ventilation unit is a fully equipped air treatment unit (fan, filter, air heater, air valve and silencer). High efficiency of air treatment, ensured by the development and design of the unit individually for each customer. The environmental safety of products is ensured. A...
190 80000 RUB
In stock
Wall-mounted supply and exhaust hood. Frameless. Made from AISI 430 stainless steel, 0.8mm thick. With labyrinth filters (grease traps). The umbrella is supplied assembled.
19 31100 RUB
In stock
Greenhouse, industrial and agricultural complexes and hangars equipped with supply and exhaust ventilation with heat recovery from the Tent TTK company (Moscow and Moscow region). The Tent TTK company has been offering its services for repair and custom manufacturing of metal structures of any...
1 00000 RUB
In stock
These units were designed to work with metalworking machines when sharpening tools. Dust collection units are designed to suction and clean the air from dust impurities, small and large metal shavings formed during dry processing of metal products on sharpening, grinding and metal-cutting...
50 00000 RUB
In stock
We produce a telescopic ventilation unit TVU-2, which is used for ventilation of grain mounds.
2 50000 RUB
In stock
smoke exhauster dn21-f right 90* 2 pieces and left 90* 1 piece price 420,000 per piece Impeller 45.17.1244 left-hand rotation impeller D-13.5- 25,000 ₽ Chassis shaft VGD-20U part 184402- 2 pcs. - 35,000 ₽ Shaft 45.17.1335 of axial pump DOD-31.5 - 350,000 ₽ SHAFT VD-15.5 - 18,000 ₽ Shaft 45.23.264...
420 00000 RUB
In stock
Compact air handling units with electric and water heaters CAPSULE The Turkov company offers highly efficient air handling units. Capsule is a classic supply air ventilation unit, thanks to which the air undergoes forced cleaning and heating, after which fresh air is delivered to the premises,...
Contact us for a price
In stock
*DELIVERY of our products worldwide! **we accept INDIVIDUAL orders _____________________________________________ Blooming LLC is a Belarusian manufacturer and supplier of road construction, municipal and agricultural equipment. The company has been successfully present and developing on the...
Contact us for a price
In stock
It is a durable aluminum structure designed to operate the ventilation system. Designed for installation of reversible fans under the false ceiling of the drying chamber. Own production. The price is indicated per linear meter. Shells are installed in two types: - steel with anti-corrosion...
22 00000 RUB
In stock
Attention! Dear friends! Thank you for your interest in EFFECTER equipment - extra-class ventilation units! Call +7 499 577-00-54 or write to info@effecter.su You may be provided with special conditions! Thank you! Air: 2000 m3/h at 230 Pa; Power: 0.9 kW; Recuperator: 2 stages 46.55 sq.m;...
Contact us for a price
In stock
Show another 64 products
Product filters
Место расположения
Тип объявления
Цена

RUB  –  RUB

  • 0RUB
  • 2160000000RUB
Состояние
Год выпуска

 – 

  • 1982
  • 2024