Drilling rig KAISHAN - KJ211

Drilling rig KAISHAN - KJ211

Function and characteristics
This KJ211 machine is designed for mining, preparatory work and tunneling. It is a hydraulic drilling rig for independent operation, which can be used for vertical drilling, inclined and horizontal drilling. Applicable for tunneling operation of hard stones with a cross-section of 12-35m2.

At the same time, this handle can be used to open laterally and fix the anchor.

The placement of the drill carriage will also ensure that the operator appears to be in good condition.

The device is in a balanced state. The four-wheel drive can ensure the drilling rig moves in a narrow road flexibly, quickly and safely.

The high-frequency impact drill optimizes the efficiency of shock wave transmission, improves drilling speed, reduces drilling tool costs and enhances equipment performance.

A spacious working space and a range of automatic functions ensure that the driver devotes all his attention to drilling safely, quickly and accurately.

Each repair part is well protected and also easy to maintain.

Dimensions and weight
Length 10000mm
Width 1600mm
Height 1850/2650mm
Weight 11000 kg
Operating speed (horizontal) 10km/h
Max. ability 200
Security protection
Noise level＜110dB(A)
Adjustable maximum safety meets the requirement of anti-fall
Drill rod
Type K26F
Automatic shutdown form
Flexible drill rod 1200mm
Electronic wind and water system
Air compressor 1×JN5
Movement 0.5m3/min
Pressure 5-8bar
Drill shank lubrication
Gas consumption for lubrication 0.3m3/min
Oil consumption for lubrication 180-250g/hour
Water pump 1×CR3
Power 1.5kW
Pump capacity 3m3/hour
Chassis
Exhaust cleaning Gas catalyst power
Transmission system Four-wheel drive closed type
Angle Rear axle rotation ±6°
Tire 300-15
Control mechanism Articulating control
Travel brake Hydraulic brake
Parking brake Multi-disc brake
Diesel engine BF4L2011 53kW，2800rpm
Drilling system
Drill hammer 1×HC50/R38
Power 13kW
Wave pressure 105L/min
Max. rotation pressure 130bar
Frequency 150bar
Torque 62 Hz
Hole diameter 325Nm
Push beam rotation 32-76mm
Additional 360° push beam movement
Drill hammer 1600mm
Drill pipe R38-H35-R32-3700
Electric hydraulic power
Electric motor 45kW/55kW 3-phase
Hammer/Propulsion/Drill Rod Piston Pump with Adjustable Axes
Rotation Gear Pump
Filtration accuracy 10μ
Hydraulic oil tank 240L
Hydraulic cooler Water cooler
Operation voltage 380V
Frequency 50Hz
Star delta launch method
Cable Specification
3×35+3G6+2×1.5
3×50+3G6+2×1.5