CTTM CARGOLINE 9322-0000-50

The chassis frame is a welded structure, made of OVAKO steel (Sweden). Load-bearing frame spars of I-beam profile. The platform transverse spars are integrated into the chassis frame. The frame is coated with epoxy primer and polyurethane synthetic enamel RAL 7021 (gray-black). The constituent elements of the semi-trailer frame are shot blasted and painted, which provides reliable protection from adverse environmental influences and gives an aesthetic appearance to this structural element. The chassis flooring is waterproof laminated plywood 27 mm thick. There are holes in the frame flange for securing cargo along the entire length of the frame. The kingpin is manufactured by SAF (Germany), two inches (2”), replaceable, disc type. The supporting device is manufactured by SAF/ (Germany), with a two-stage gearbox. The unit is three-axle - manufactured by SAF/BPW with air suspension, with a permissible load of 9 tons per axle, with single-pitch tires measuring 385/65 R22.5. Braking mechanisms - disc. Braking system - EBS Knorr Bremse: two-wire, ABS 2S/2M its distinguishing feature is the minimum number of devices and electronic control (microprocessor programmable unit instead of a mechanical air distributor), the two rear axles are equipped with energy accumulators. ABS socket 7 pin. Wheels - with tubeless tires size 385/65 R22.5, road tread pattern. No spare wheel. Spare wheel basket – for two spare wheels. Lateral protection is made of aluminum profile. Equipment of the CTTM CARGOLINE 9322-0000-50 semi-trailer: retractable galvanized ladder; two anti-recoil plastic shoes mounted on support devices; plastic tool box; 4 plastic wings with mudguards; bracket for connecting the brake and lighting system at the front of the chassis. Electrical equipment - manufactured by Hella (Germany), made according to a two-wire circuit, consists of: two 7-pin connectors and one 15-pin cable, eight side orange lights, two rear combination lights, one license plate light, and two rear side marker lights "snail" in an elastic casing. The superstructure of the CTTM CARGOLINE 9322-0000-50 semi-trailer is a curtain platform with a sliding awning structure (sliding roof and side curtains). The mechanism for the sliding roof and curtains is made by Edscha (Germany): the upper part of the awning frame and the side walls have a sliding mechanism for ease of loading and unloading, the so-called. "curtain mechanism" with an awning tension mechanism in the rear part. The front wall is a profiled steel sheet, painted with GRAY auto enamel and lined with a sheet of plywood on the inside. Sliding side racks - manufactured by HESTAL (Germany): sliding racks are installed to provide the largest space for loading operations. Lathing - WITHOUT wooden lathing Roof awning and side curtains - polyester fabric coated with PVC paste: side curtains are made of silver awning with a density of 850-900 g/m2; The sliding roof awning is made of white light-penetrating material with a density of 650-680 g/m2. Fastening the awning through straps to the platform harness. The door portal is made of galvanized steel with an enamel coating; rubber dampers are installed on the threshold, providing reliable protection when approaching the ramp. Hinged doors - manufactured by HESTAL (Germany), double-leaf, with an opening angle of 270°. The door leaf is inlaid aluminum. Fittings: 4 hinges and 2 rods per door (the rods are located inside the aluminum door profile). The door locks in the open position are rod locks. Technical characteristics of the semi-trailer CTTM CARGOLINE 9322-0000-50 Curb weight, kg 6,300 Permissible load on the fifth wheel, kg 11,000 Total permissible load on the axle unit, kg 24,000 (for each axle 8,000) Technically possible load on the unit, kg 27,000 (for each axle 9,000) Permissible total weight, kg 35,000 Technically possible total weight, kg 38,000 Overall length, mm 13,770 Overall width, mm 2,550 Loading platform length, mm 13,600 Loading platform width, mm 2 480 Clear height under the roof, mm 2,715 Fifth wheel height, mm 1,150