Dimensions
Overall dimensions, mm:
- length 13 900
- width 2 550
- height 4000
Internal dimensions of the body, mm:
- length - 13 615;
- width - 2 470;
- height - 2 675;
- internal volume, m3 90
Fifth wheel height, mm 1,150
Loading height, mm 1,300
Track, mm 2,040
Radius of the front part of the semi-trailer, no more, mm:
- when installing the king pin in the first slot - 1,630;
- when installing the kingpin in the second socket - 2,040;
Distance from the pivot to the nearest part of the supporting device, not less, mm:
- when installing the king pin in the first slot - 2,895;
- when installing the kingpin in the second socket - 2,330;
Weight
Maximum gross weight, kg 35,500
Weight of the equipped semi-trailer, kg 7,000
Total weight distribution, kg:
- for fifth wheel coupling 11,500
- for suspension 24,000
Chassis
- increased strength of frame side members for the operation of semi-trailers in harsh road conditions in Russia is achieved by using high-strength OVAKO steel and double-sided welding of the belts. The safety factor is 2.25 (1.5 is the load unevenness factor and 1.5 is the dynamic factor). Two I-section spars are connected to each other by transverse beams of Z-shaped and hat-shaped sections and are capable of operating in a temperature range from -40 °C to +70 °C.
- JOST (Germany) 2-inch kingpin in accordance with UNECE Rules No. 55. installed in one of two positions.
- support device JOST (Germany), HAACON (Germany) with a lifting capacity of 24 tons with control on the right.
- plastic tool box.
- frame for the number.
- 2 wheel chocks (shoes).
- basket for mounting 2 spare wheels, including 2 spare wheel mounts.
- lateral underrun protection made in accordance with UNECE Rules No. 73.
- plastic half-wings in front of the first and behind the rear axles.
- rear rubber bumpers.
- rear protective device made according to UNECE rules No. 58.
Axle units
3-axle BPW drum or disc type unit (Germany), with reinforced suspension for harsh road conditions, permissible load on each axle 9000 kg.
Air suspension with brake force regulator.
Floor level control valve.
Wheels and tires
- wheel assembly 7 pcs. (incl. 1 spare).
- tires size 385/65R22.5 Kormoran.
- steel wheels 22.5x11.75.
Brake system
- pneumatic braking system WABCO, HALDEX, BPW (Germany) with EBS 2S-2M.
- EBS sensors on the second axis.
- semi-trailer rollover prevention system – RSS (RollStabilitySystem).
- membrane type brake chambers.
- semi-automatic parking brake system with spring energy accumulators on the second and third axles.
- two pneumatic connection heads (supply and control).
- ABS socket according to ISO7638 (without connecting cables with the tractor).
Electrical equipment ASPOEK (Austria) with 24 volt mains voltage.
- 2 front marker lights, white.
- 8 side marker lights.
- 2 license plate lights.
- 2 five-chamber rear lights with reflectors.
- 2 contour rear lights in rubber casings.
- 2 seven-pole connectors (without connecting cables to the tractor).
Superstructure
- front steel portal with a stacked wall made of aluminum profiles;
- 6 steel middle racks HESTAL (Germany);
- 2 rear steel, removable racks (all racks with four pockets for wooden crossbars);
- 4 rows of wooden crossbars on the left and right;
- 4 pairs of side boards on the left and right, 600 mm high, made of anodized aluminum;
- movable roof frame;
- aluminum gates;
- fittings on all sides SUER (Germany);
- PVC awning, custom made, with light-transmitting stripes on the roof.
Floor
- Z-shaped and hat-shaped cross beams.
- laminated multi-layer birch plywood 27mm thick with a corrugated surface.
- the ability to work inside the body of a forklift with an axle load of up to 4.6 tons.
- 30 rings for securing loads with a lifting capacity of 2 tons, installed in a specially designed non-joint side strap profile.
Painting
- all steel parts are shot blasted before painting;
- side protection made of silver plastic profile, reinforced with steel profile;
- silver wheel rims;
- the color of the chassis and external frame trim is one-color to choose from
- the color of the racks and the front wall is plain to choose from
- special two-layer painting with high-quality quick-drying polymethacrylic primer containing zinc phosphate, MONOPRIMER and two-component acrylic-polyurethane enamel Procoat AP 259 SC, which has excellent resistance to mechanical, chemical influences, UV rays and atmospheric factors, protecting the frame from “under-layer” corrosion.
Credit, leasing, guarantee
- Sale
- new
- Other
No reviews found
