Drill rods

For horizontal directional drilling, drill rods are used. They are a very common type of equipment. They can be used either separately from each other, or several pieces at once, in a connected form. They are intended for the following purposes: - supplying a drilling solution to the bottom hole area; - air supply; - raising and lowering a tool for rock destruction; - transferring a drill or a bit of axial load and torque; - transfer of pressure to the cutting tool. High-quality drill rods are durable, strong, have a large number of “unscrewing-make-up” cycles, and allow drilling at a fairly high speed. Another indicator that you need to pay attention to is the wear resistance of threaded connections. Rods that do not have a welded seam have increased flexibility and strength. The thicker the walls of the rod, the greater the load it can withstand. If the tool is used in accordance with all operating rules, you automatically increase its service life several times. During the drilling process, drill rods are subject to heavy loads and therefore must meet the required quality standards. To do this, it is enough to purchase products from proven and reliable manufacturers. But, in addition to this, this tool must be fully suitable for the model of drilling rig that you use in your work. You also need to pay attention to the thickness of the walls, the diameter of the rod and the bending radius. If you want to be guaranteed not to make a mistake in your purchase, you can get advice from our managers. You can call the toll-free line at any convenient time. You can clarify any questions you have by calling 8 (800) 775-28-06 with the managers of the Construction Equipment company.