Explosion-proof socket RMGE-16-250-3 (380V)

Explosion-proof plug 93701030 (FLUX, Germany), 3-pole CCE type plug, Explosion protection class: II 2 G EEx de IIC T6220 – 240 V, protection class: IP 65 Explosion-proof socket 93750041 (FLUX, Germany), 3-pole CCE type plug, Explosion class protection :II 2 G EEx de IIC T6220 – 240 V, protection class: IP 65 Explosion-proof plugs type VGME are designed for connecting mobile equipment: portable lamps, measuring instruments, batteries, pumps, fans, blowers, compressors, generators, and other non-stationary and portable devices. The explosion-proof RGME connector is switched on by inserting the VGME plug and turning it 45°, which closes the internal switch. The RGME connector switch is turned on when the VGME plug is inserted. It is possible to remove the plug from the connector only when the switch is in the "off" position. Scope of application - hazardous areas of indoor and outdoor installations in accordance with explosion protection markings, GOST 30852.13-2002 (IEC 60079-14:1996) and areas hazardous for ignition of combustible dust, according to GOST IEC 61241-3-2011, hazardous production facilities of I, II, III, IV hazard classes, supervised by Rostechnadzor of the Russian Federation and national technical supervision of the CU and CIS countries. Characteristics: Ambient temperature, °C: -60...+40/ +55Maximum voltage, V: 380Maximum current, A: 16Explosion protection: 1Ex de IIC T6...T5 Gb X, IP66Connection: Direct connection to wire terminals with a cross-section of 2.5-4 mm2 (for VGME-16)Case material: Polyester, reinforced with fiberglass, chemically resistant to working environments and resistant to UV radiation. Climatic version: UHL1