Copper control cable KVBbShng-LS TU 16.K01-37-2003

Buy copper control cable KVBbShng-LS TU 16.K01-37-2003 from NPK “Special Metallurgy” with delivery throughout Russia and CIS countriesCable TU 16.K01-37-2003 is an electrical product intended for fixed connection to electrical devices , devices. Characteristics of a copper control cable Average service life - 25 years Number of cores - 1-61 Core material - copper Permissible humidity at a temperature of 35 degrees Celsius - 98% Voltage - 0.66 kW and with a frequency of up to 100 Hz Operating temperature range - from -50 to +50 °C Core cross-section – from 0.75 to 6 sq. mm Product design Current-carrying core. Insulation made of PVC plastic compound, polyvinyl chloride composition. Shell. Some types include shield, armor, thermal barrier, separation layer. Advantages of copper cable Reliability Simple installation Resistance to mechanical damage Long service life High level of protection Resistance to moisture and aggressive environments Safety - the wire does not propagate combustion Flexibility Resistance to solar radiation The KVBbShng-LS cable is laid in residential premises, tunnels, channels. Suitable for use in aggressive environments, as well as in hazardous areas and open air. This price list is for informational purposes only and under no circumstances is it a public offer defined by the provisions of Part 2 of Art. 437 of the Civil Code of the Russian Federation. Buy hot-rolled steel I-beam 2S1 St3sp (VSt3sp) GOST R 57837-217 with delivery to any point in the Russian Federation and CIS countries directly from NPK “Special Metallurgy”. Steel I-beam - a beam-shaped profile with an H-shaped cross section. The faces of the I-beam are parallel to each other, or they can be at a certain angle. I-beam classification According to the manufacturing method, the I-beam is divided into: welded; hot rolled According to its general appearance, the I-beam is divided into: ordinary; columnar; normal; wide-shelf; special - monorail; for reinforcing mine shafts. The length of the I-beam can be: measured; immeasurable. Steel I-beam St3sp (VSt3sp) is produced in accordance with GOST R 57837-217. Technical characteristics of a steel I-beam GOST R 57837-217 Characteristic Value Profile number 2S1 Material grade St3sp (VSt3sp) Manufacturing method hot-rolled Material structural carbon steel of ordinary quality NTD GOST R 57837-217 Properties of I-beam 2S1 strength; rigidity; wear resistance; corrosion resistance; machinability. Areas of application of steel I-beams I-beams are used in civil and industrial construction, mechanical engineering, the automotive industry, and carriage building. I-beams are used in the construction of supports, walls, bridges, and ground crossings. Beams are used to create crane trestles, monorails and masts.