Aluminum power cable ASBL-1 GOST 18410-73

Buy aluminum power cable ASBl-1 GOST 18410-73 from NPK “Special Metallurgy” with delivery throughout Russia and CIS countries. Cable GOST 18410-73 is an aluminum wire necessary for the distribution of electricity. Design Current-carrying core made of aluminum wire. Depending on the modification, the design can be one-, two-, or three-core. Insulation made of polyvinyl chloride plastic, polyethylene, vulcanized polyethylene. Some types of cables have an armored sheath made of metal tapes. Characteristics of aluminum power cable Rated voltage – from 0.66 to 1 kV Rated frequency – 50 hertz Permissible operating temperature – from -50 °C to +50 °C; Permissible humidity level at temperatures up to +35 °C – 98% Minimum bending radius – 4 diameters Permissible installation temperature no less than minus 5 °C Average service life – 30 years Shape – flat, round, depends on the type of cable Product advantages Corrosion resistance Safety – the wire does not propagate combustion Relatively low cost Wear resistance Long service life Durability Resistance to aggressive environmental influences ASBl-1 cable is used to create high-voltage power lines. This price list is for informational purposes only and under no circumstances is it a public offer defined by the provisions of Part 2 of Art. 437 of the Civil Code of the Russian Federation. Buy a steel forging 15G2SF GOST 7505-89 stamped with delivery to any Russian Federation and CIS countries directly from the Special Metallurgy Research and Production Company. A steel forging is an intermediate product manufactured by the method of plastic deformation of metal. The workpiece can be of different types depending on the shape and size of the future product. Characteristics Material Low-alloy structural steel for welded structures Brand 15G2SF Production method stamped NTD GOST 7505-89 Properties of forging 15G2SF high strength; wear resistance; corrosion resistance; elasticity. Areas of application of steel forgings Stamped forgings are used in construction, mechanical engineering, shipbuilding, metallurgical, petrochemical, and mining industries. The product is used for the manufacture of reinforcement structures, bearings, turbines, shafts, parts for agricultural machinery. Possible products made from forgings GOST 7505-89 gears, including drive gears; cardan shaft crosspieces; bushings; levers; drive sprockets; axle shafts; input shafts. Buy steel circle 45 mm st. 35 GOST 1050-2013 forged with delivery to any Russian Federation and CIS countries directly from NPK “Special Metallurgy”. A steel circle is a rolled metal product in the form of a rod with a round cross-section. Characteristics Material Structural carbon steel, high-quality Material grade Art. 35 Size 45 mm NTD GOST 1050-2013 Note forged A forged steel circle is made by forging - high-temperature pressure treatment of metal. Properties of the circle Art. 35 As the name suggests, the main distinguishing feature of the round bar GOST 1050-2013 is its high carbon content compared to other steels. In addition, this steel is of high quality. This means that the carbon content in its composition is optimal, and the content of harmful impurities, such as sulfur or phosphorus, is minimal. Thanks to this, a circle made of high-quality structural steel has a number of advantages: strength; plastic; impact strength; wear resistance. Application of the GOST 1050-2013 circle The range of applications of the 45 mm round bar is wide. It can be used to make: washers, pipes, gaskets; pipes, bushings, lugs, rods; screws, nuts, fasteners; shafts, disks, rotors, gears; bottoms, drums of steam boilers; coupling halves, pipes. Buy hot-rolled steel I-beam 45DB4 S44 GOST R 57837-217 with delivery to any point in the Russian Federation and CIS countries directly from NPK Special Metallurgy. Steel I-beam - a beam-shaped profile with an H-shaped cross section. The faces of the I-beam are parallel to each other, or they can be at a certain angle. I-beam classification According to the manufacturing method, the I-beam is divided into: welded; hot rolled According to its general appearance, the I-beam is divided into: ordinary; columnar; normal; wide-shelf; special - monorail; for reinforcing mine shafts. The length of the I-beam can be: measured; immeasurable. Steel I-beam C44 is produced in accordance with GOST R 57837-217. Technical characteristics of a steel I-beam GOST R 57837-217 Characteristic Value Profile number 45DB4 Material grade C44 Manufacturing method hot-rolled Material steel for building structures NTD GOST R 57837-217 Properties of I-beam 45DB4 strength; rigidity; wear resistance; corrosion resistance; machinability. Areas of application for steel I-beams I-beams are used in civil and industrial constructionflatware, mechanical engineering, automotive industry, carriage building. I-beams are used in the construction of supports, walls, bridges, and ground crossings. Beams are used to create crane trestles, monorails and masts.