Buy pneumatic impact wrench 1/2" 83kgm reinforced. Licota PAW-04004

Pneumatic impact wrenches are designed for unscrewing and tightening fasteners and are used to facilitate work related to the repair of cars, commercial vehicles, and trucks. The torque force is adjusted using a handle located on the impact wrench body. Use only special impact sockets and accessories for work. For pneumatic tools to operate, dry, purified air enriched with special oil is required. The use of unpurified air is unacceptable, because dust particles can lead to breakdown and rapid wear of the pneumatic tool mechanism, and moisture will cause corrosion. To clean the air in the supply system, it is necessary to use special filters - oil and moisture separators. For example, PAP-C202C or PAP-C206C is suitable for this impact wrench. To enrich the air with oil, the best way is to install a lubricating device in the pneumatic line - a lubricator, which is installed after the filter and it will lubricate automatically. The PAP-C204C is suitable for this impact wrench. For longer-lasting performance, use an additional linear lubricator. You can also use a modular group for air preparation, which combines an air filter, a reducer and a lubricator. For this model of impact wrench, the best option would be to install the PAP-C205B or PAP-C205C modular group. Hoses used for air supply must meet the following requirements: - withstand a load of at least 10 atmospheres; - be oil resistant; - have a sufficient cross-sectional size to allow the required volume of air to be supplied. The volume of air consumed by this impact wrench requires hoses with an internal diameter of 10 mm or, if the line length is more than 10 meters, 12 mm. You can use spiral hoses, meter hoses or special reels. To connect hoses, use special adapters and fittings. Torque (Nm) 830 Rotation speed (rpm) 6000 rpm Impact mechanism Twin Hammer Air consumption (l/min) 330 l/min Operating pressure 6.3 kg/cm? Fitting size 1/4" Drive size (") 1/2"