Ax 600/1000/1250 g with fiberglass handle VIRA RAGE

The minimum order value for VIRA goods for shipment is RUB 50,000. VIRA ax with fiberglass handle. The ax is used for chopping, splitting firewood, and primary processing of wood. We keep product quality under control and use CS45 tool steel for the impact surface. The working part of the ax is tightly connected to the handle and feels like its extension. These parts are almost impossible to separate. Ax head hardness: 42-52 HRC. Improvements have been made to the hardening of the tool; now this value varies from 4 to 10 mm, instead of the previous 2-6 mm. The cutting edge of the ax has become more resistant to destruction and you will not have to sharpen it often. The ax is sharpened at an angle of 40 degrees - this allows the blade to be deep enough into the wood, while keeping it sharp longer. The fiberglass handle of the ax is very durable, but lightweight. Using multiple winding, this raw material is used to make sailing masts, car mufflers and bicycle frames. Another advantage of the material is its ability to absorb transmitted impacts, which means you will be less likely to hit your hands when cutting wood. The TPR thermoplastic rubber coating is soft to the touch and prevents the handle from slipping in the palm. We have brought VIRA axes into compliance with the requirements of the German industrial quality standard Geprüfte Sicherheit (GS). In addition, the axes comply with the quality of the British Standards Institute BSI.