Industrial oil IGP-30 (I-G-S-46)
Industrial oil IGP-30 (I-G-S-46) Industrial oil IGP-30 (TU 38.101413-97) - distillate, residual or a mixture of distillate and residual petroleum oils from sulfur oils of deep selective purification with anti-oxidation, anti-wear, anti-corrosion and anti-foam additives. The main indicators characterizing the performance properties of IGP oils are viscosity, stability against oxidation, anti-corrosion properties and resistance to foaming. Scope of application of IGP-30 oil It is mainly used for lubrication of modern domestic and imported equipment in various sectors of the national economy, the operation of which requires oils with improved performance properties. IGP-30 oil serves as a working fluid in hydraulic systems of machine tools, automatic lines, and presses. Used for lubrication of high-speed gearboxes, variators, electromagnetic and gear couplings, bearing units, sliding and rolling guides and other units and mechanisms that require oils with improved antioxidant and anti-wear properties. Technical characteristics Name of indicator Norm according to GOST (TU) Kinematic viscosity at 40°C, mm2/s 39-50 Acid number, mg KOH per 1 g of oil, no more than 1.0 Viscosity index, no less than 90 Ash content, %, no more 0.2 Content of mechanical impurities none Water content traces Density, kg/m3, no more than 885 Pour point, °C, no more than minus 15 Color on a CNT colorimeter, CNT units, no more than 3.5 Flash point, determined in an open crucible, °C, not less than 200 Mass fraction, %: zinc, not less than 0.04 sulfur, not more than 1.0 Tendency to foam: foam stability, cm3, not more: at 24°C 50/5 at 94°C 50/ 5 Delivery by agreement.
No reviews found