Firefighting pressure hoses with an internal latex waterproofing layer “Latexed”
Marking RPM (P) 1,6-UHL 1 technical characteristics Main tactical and technical characteristics Nominal bore (DN) internal diameter, mm 25 (25 ± 2), 40 (38 ± 2), 50 (51 ± 2), 65 ( 66 ± 2), 80 (77 ± 2), 90 (89 ± 2), 150 (150 ± 3). Working pressure – 1.6 MPa. Test pressure – not less than 2.0 MPa. Burst pressure – not less than 3.5 MPa. The operating temperature range is from -60 to +40 o C. They have high elasticity. Compact, easy to maintain and reliable in operation. They are highly resistant to mold and do not rot in humid conditions. Inside the sleeves there is a water-repellent, flat surface of the waterproofing chamber, which facilitates the rapid passage of water flow at maximum pressure. Designed to complete fire fighting vehicles and can be used at industrial facilities, sea and river vessels. They have an advantage over other fire hoses because they are made of natural latex, due to which they have high plasticity, and the water-repellent inner surface facilitates the rapid passage of water flow at maximum pressure.
No reviews found
