Butara scrubber MSB-430

The device is intended for production, geological exploration, debugging of washing technologies, training, and as an additional enrichment of concentrates obtained at the gateways of large dredges and industrial devices. TECHNICAL CHARACTERISTICS
Drive power, kW 2.9 ICE: "Honda GX 120"
Maximum productivity for the source material; 15 m3/h.
Butara rotation frequency, rpm, no more than 35 rpm. min.
Length of the blind part of the butara; 840 mm.
Length of the sowing part of the butara; 910 mm.
Diameter of holes on the sowing part; 50 mm.
Butara inclination angle; deg 0° - 5°
Product weight; 430 kg.
Overall dimensions of the product: Length 2405 mm. Width / width with gateway 1300 / 2830 mm. Height 1640 mm.
The industrial device "MSB-430" is designed for disintegration and enrichment of gold-bearing sands with an initial particle size of up to 50 mm. in order to obtain an enriched concentrate. The industrial device is used in alluvial deposits of gold and platinum as processing equipment, for washing samples during geological exploration or at the stage of material reduction. The industrial device's drum rotates on wear-resistant polyurethane wheels, ensuring reliable and long-term operation of the industrial device. The industrial device is equipped with a standard level that facilitates installation of the device in two planes. To protect from dust and dirt, the level is closed with a hinged lid. The water line from the motor pump is connected to the industrial device with a quick-disconnect coupling (QRC), facilitating quick mobile re-arrangement. The direction of irrigation in the scrubber tank is regulated by a special lever, which is very convenient in field conditions. The sowing part of the butara is made of wear-resistant steel. If necessary, the mesh can be changed to a different sieve size. In the industrial device, each irrigation unit is individually regulated, which is very convenient for changing the volume of water in the receiving hopper or scrubber tank. The irrigation system of the device additionally has a hose with a gun for easy removal of the concentrate. Also, finishing equipment necessary for work in field conditions can be connected to this irrigation element. - productivity: 5m3 to 15m3/hour; - water consumption: 300-370 l/min; - piece size (max): 50 mm. MSB-430 is installed on a single "Capfe" chassis and is easily attached to vehicles. Motor pump "Honda GX 620, MP-80" Technical characteristics: Flow rate in nominal mode, liter/s 10. Pressure in nominal mode, 60 m.
Maximum geometric suction height, 8m.
Maximum head, 85m.
Suction time at maximum geometry. height, no more than 40 seconds.
Maximum productivity, 20 l/s
Overall dimensions, mm, no more: L/W/H 800/620/720
Dry weight, no more than 98 kg.
Pump type: centrifugal, single-stage, cantilever
Automatic vacuum system