Hydraulic hammer Delta F-20S noise-proof housing

Hydraulic hammer Delta F-20S noise-proof housing Technical characteristics Hydraulic hammer weight, kg 1750 (with suspension and working tools) Excavator weight, t 18-26 Working tool diameter, mm 135 Impact energy, J 5290 Impact frequency, beats/min 400-800 Working pressure, atm 160- 180 Oil flow, l/min 130-150 Tool working length, mm 764 Hose diameter, mm (inch) 25 (1` BSP) Pallet weight, kg 23 Total weight (full set), kg 1761 Length of hydraulic hammer with working tool and suspension, mm 2773 Length of hydraulic hammer with working tool without suspension, mm 2414 Length of hydraulic hammer without working tool and suspension, mm 1650 Hydraulic hammers are used as a replacement working tool for hydraulic excavators of domestic and foreign production, and other hydraulic machines (loaders, manipulators, etc.) of appropriate weight and load-carrying capacity Delta F-20S, subject to hydraulic circuit requirements. Delta F-20S allows you to take a professional approach to construction work. It is the most productive hydraulic hammer for work in the city. The hydraulic hammer is used on excavators weighing from 20 to 30 tons, with a bucket volume from 1 to 1.6 m3. Delta F-20S also allows you to adjust the energy and frequency of impacts in accordance with the necessary requirements and the material being destroyed. High technical characteristics make it possible to use it for crushing oversized materials in quarries with material with a hardness of 16 units on the Protodyakonov scale, a compressive strength of 200 MPa, and to work with granite and diabase in small volumes of work. The power of the hydraulic hammer is sufficient to carry out work on highly reinforced concrete during the destruction of bridge construction objects and fortifications. Work can be carried out in any spatial position, including horizontal. The design of the closed body of hydraulic hammers has a number of advantages: reduced noise level increased efficiency of vibration protection increased service life of parts and consumables most susceptible to rapid wear. For this model of hydraulic hammer, it is recommended to use the following options: automatic lubrication system for working bushings; a system for wetting the destroyed object to protect it from construction dust (a housing is required); closed noise-proof housing, which is recommended for underwater work (the presence of a compressor and automatic lubrication is mandatory). air supply kit for the hydraulic hammer for underwater work (a housing is required); electro-hydraulic emergency stop kit for the hydraulic hammer when the air supply from the compressor is cut off to protect against water hammer when working under water. Before starting to operate the hydraulic hammer, you must study the operating manual and safe operation techniques. The manufacturer guarantees high performance and reliable operation of hydraulic hammers subject to compliance with the instructions. Applicability of New Holland excavators E195, E200SR, E215LC, E235SR, E245, E265LC Hyundai excavator...